How to Fix Broken Car Window

How to Fix Broken Car Window Temporarily

- ADVERTISEMENT -

How to Fix Broken Car Window. Whether you are a car owner or a driver, you must have been a victim of a broken car window. Yes, it happens. It doesn’t have to necessarily mean that you are rough.

Probably maybe something fell on your car or some riff-raff broke your car window.

How to Fix Broken Car Window

- ADVERTISEMENT -

And I can imagine how painful and frustrating that can be. Dealin g with the fact that car windows are expensive and also you have to change your car window.

Well, if you are a victim of such, in this article, we will be showing you how to fix broken car window. Just keep reading carefully to see how.

What You Need to Get Started

Here are all you need to get started:

  • Dry microfiber cloth to remove dust from the glass.
  • Packaging tape; maybe 1 roll
  • Plastic garbage bag
  • Masking tape to protect the car’s paint.
  • Car vacuum with vehicle-specific attachments.
  • Hand gloves
  • Pieces of paper to protect the bottom of the window and a helping hand.

How to Fix Broken Car Window Temporary

Here is all you need to do to fix the broken car window temporary:

The very first step is to bring together all that you will be needing to fix broken car window temporarily.

Protection

The next step is to protect your hands by wearing gloves. This is to protect your hands from any glass debris.

Clean up glass debris

Some pieces of the car glass might have fallen on the car seat or anywhere else. So you will be needing a vacuum to remove them to avoid being cut by the glass debris.

See also  How to Remove Car Dents

Cleaning the window

Wet the dry microfiber cloth with some little water. Then use it to clean the window should incase there are particles of dust on the window.

This will make sure that the surface is clean so that the tape can stick well.

Covering the hole

To cover the hole, open the door of your car. For easy covering, sit in the seat close to the broken window. Then measure the dimensions of the hole, both the length and the width.

Also, cut the plastic garbage bag using the measurement for the length and the width then place the bag over the hole neatly.

Taping

Once you have placed the plastic bag, use your hands to hold it to ensure it is tightly placed over the glass hole. You would definitely be needing a helping hand.

Now apply the duct tape over the plastic bag then tape across the middle of the plastic bag. This would hold it more.

Also, make sure that there is no space around. This is to prevent rain or snow from entering your car.

Finishing up

You might want to be extra careful so that the bag used in covering the hole doesn’t fall off.

- ADVERTISEMENT -

So all you need to do is to place a second layer of the packing tape around. And also be sure that it is properly applied. With that you are good to go.

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply